MOX-Tape 600-R

Mox-Tape 600-R Series® Tape is produced in the form of a flat rectangular cross section available in 12 yard rolls. Each tape is interleaved with a quick release film. Mox tapes are self-bonding and self-fusing. After curing at room temperature for 24 hours, the tape forms an inseparable silicone layer that must be cut for removal.

Dielectric Strength	All Sizes	400 VPM Minimum

Hardness	Shore "A" (ASTM D2240)	50 +/- 10

Tensile strength	40# / Inch of Width	750 PSI Minimum

Elongation	At Break (ASTM D-412)	350% Minimum

Temperature Range	-65° to +500° F

Resistivity	Volume Resistivity (ASTM D991)	1013 ohm/cm. Minimum

Adhesion	Tackiness (ASTM D2140) 2 P.P.I

Military Specification
	MIL-I-46852C
	Type I (CID A-A-59163)

N0TE: The above properties are published as a guide only, and should not be used for specification without testing in your own laboratory.

Part No.	Thickness	Width	Pound/Roll Approximate
612 - .75	.012	0.75	.17
612 - 1	.012	1.00	.22
612 - 1.25	.012	1.25	.28
615 - .75	.015	0.75	.21
615 - 1	.015	1.00	.28
620 - .5	.020	0.50	.19
620 - .75	.020	0.75	.28
620 - 1	.020	1.00	.37
620 - 1.25	.020	1.25	.46
630 - .5	.030	0.50	.28