see other Freudenberg data sheets
Data sheet 58652
Data sheet 56004
|
|
see other Freudenberg data sheets |
||||||||||||
| PRODUCT INFORMATION SHEET | |||||||||||||
|
|
Freudenberg-NOK Part Number | ||||||||||||
| 58651 | |||||||||||||
| Product Description | |||||||||||||
| Fluorosilicone Sinusoidal Fuel Resistant Tape | |||||||||||||
| PRODUCT INFORMATION | |||||||||||||
| MIL Specification: MIL-I-22444C * | |||||||||||||
| Design / Construction | Value | Tolerance | |||||||||||
| Thickness | .020" | +/- .002" | |||||||||||
| Width | 1.00" | +/- .020" | |||||||||||
| Length | 60 ft. | +/- 6.00" | |||||||||||
| Tape Colour | Lt. Blue | N/A | |||||||||||
| Guideline Colour | N/A | N/A | |||||||||||
| Physical Properties | Value | Specification | |||||||||||
| Tensile Strength (lbs/inch.) | 56 | 40 lbs/inch. Min | |||||||||||
| Elongation (%) | 25% | 15 % min. | |||||||||||
| Inclined Mandrel Tack Test (inch.) | 0.25 | ASTM D2148 | |||||||||||
| Bond Strength (1 inch. width, pounds) | 5.5 | 1.0 lb/inch. min. | |||||||||||
| Dielectric Strength (Volts/mil) | 575 | 500 Min. ASTM D149 | |||||||||||
| * Note: This product meets the physical requirements outlined in MIL standard with added fuel resistant properties. | |||||||||||||
| Reinforcement Material | Sinusoidal Glass Yarn | ||||||||||||
| Interleave Material | .002" thk. Mylar | ||||||||||||
| Product Operating Temperature | -40 Deg. F to +450 Deg. F | ||||||||||||
| Product Shelf Life | One Year | ||||||||||||
| Note: Shelf life is defined as the duration of time for which the product will meet the physical requirements outlined above. | |||||||||||||
| It does not guarantee the product's usefulness in all applications. | |||||||||||||
| COMPOUND INFORMATION | |||||||||||||
| Physical Properties | Value | Test Method | |||||||||||
| Tensile Strength (PSI) | 1302 | ASTM D412 | |||||||||||
| Elongation (%) | 425 | ASTM D412 | |||||||||||
| Tear Strength (lb/in) | 146 | ASTM D624 Die B | |||||||||||
| Durometer, Shore A Points | 55 | ASTM D2240 | |||||||||||
| FLAME RETARDANCE INFORMATION | |||||||||||||
| Flame Test Method | FAA 60 Sec. Vertical | ||||||||||||
| Flame Test Information | Value | Tolerance | |||||||||||
| Flame Time (seconds) | N/A | N/A | |||||||||||
| Glow Time (seconds) | N/A | 15 sec. Max | |||||||||||
| Char Length (inches) | N/A | 6" Max. | |||||||||||
| FUEL RESISTANCE INFORMATION | |||||||||||||
| Fuel Test Information | Value | Test Method | |||||||||||
| Volume Change After 24hr Immersion @ 73F | 95.74% | ASTM D471 Ref. Fuel C | |||||||||||
| Hardness Change After 24hr Immersion @ 73F | -12 pts. | ASTM D471 Ref. Fuel C | |||||||||||
| Elongation Change After 24hr Immersion @ 73F | -61.04% | ASTM D471 Ref. Fuel C | |||||||||||
| Tensile Change After 24hr Immersion @ 73F | -59.57% | ASTM D471 Ref. Fuel C | |||||||||||
| The data presented in this document represents typical values for the production material. | |||||||||||||
| This data should not be used to write, or in place of, material specifications. | |||||||||||||
Distributed by: email: info@kiepuraaviation.com
|